e 3 ds21201 rev. 14 - 2 1 of 3 df005m-df10m www.diodes.com diodes incorporated characteristic symbol df 005m df 01m df 02m df 04m df 06m df 08m df 10m unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rmm v rwm v r 50 100 200 400 600 800 1000 v rms reverse voltage v rms 35 70 140 280 420 580 700 v average rectified output current @ t a = 40c i o 1.0 a non-repetitive peak forward surge current, 8.3 ms single half-sine-wave superimposed on rated load i fsm 50 a forward voltage (per element) @ i f = 1.0 a v fm 1.1 v peak reverse current @ t a = 25c at rated dc blocking voltage (per element) @ t a = 125c i rm 10 500 a i 2 t rating for fusing (t<8.3ms) i 2 t 10.4 a 2 s typical total capacitance per element (note 1) c t 25 pf typical thermal resistance, junction to ambient (note 2) r ja 40 c/w operating and storage temperature range t j , t stg -65 to +150 c df005m - df10m 1.0a glass passivated bridge rectifiers features case: df-m case material: molded plastic. ul flammability classification rating 94v-0 moisture sensitivity: level 1 per j-std-020c terminals: finish - tin. solder plated leads, solderable per mil-std-202, method 208 polarity: as marked on case marking: type number, see page 3 weight: 0.38 grams (approximate) mechanical data notes: 1. measured at 1.0mhz and applied reverse voltage of 4.0v dc. 2. thermal resistance, junction to ambient, measured on pc board with 5.0 2 mm (0.03mm thick) land areas. 3. rohs revision 13.2.2003. glass and high temperature solder exemptions applied, see eu directive annex notes 5 and 7. glass passivated die construction low forward voltage drop, high current capability surge overload rating to 50a peak designed for printed circuit board applications ul listed under recognized component index, file number e94661 lead free finish, rohs compliant (date code 0532+) (note 3) single phase, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. maximum ratings and electrical characteristics @ t a = 25c unless otherwise specified df-m dim min max a 7.40 7.90 b 6.20 6.50 c 0.22 0.30 d 1.27 2.03 e 7.60 8.90 g 3.81 4.69 h 8.13 8.51 j 2.40 2.60 k 5.00 5.20 l 0.46 0.58 m 1.40 1.56 n 2.10 2.34 all dimensions in mm e h l k a d c g b j
ds21201 rev. 14 - 2 2 of 3 df005m-df10m www.diodes.com 0.01 0.1 1.0 10 0.4 0.6 0.8 1.0 1.2 1.4 i , instantaneous forward current (a) f v , instantaneous forward voltage (v) fi g .2 t y p forward characteristics ( per element ) f 0 10 20 30 40 50 60 1 10 100 i , peak forward surge current (a) fsm number of cycles at 60 hz fi g . 3 max non-repetitive peak forward sur g e current single half-sine-wave 1 10 100 1 10 100 c , total capacitance (pf) t v , reverse voltage (v) fi g .4 t y pical total capacitance ( per element ) r t=25c f=1.0mhz v = 50 mv p-p j sig 0.01 0.1 1.0 10 100 20 04060 80 100 120 140 percent of rated peak reverse voltage (%) fi g .5 t y p reverse characteristics ( per element ) t = 125c j t=25c j 1 . 0 0.5 0 40 60 80 100 120 140 i , average forward current (a) (av) t , ambient temperature (c) fi g . 1 output current deratin g curve a 60 hz resistive or inductive load
* x = device type, e.g. df005s or df10s, etc. notes: 4. for packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. ds21201 rev. 14 - 2 3 of 3 df005m-df10m www.diodes.com = manufacturers? code marking xxxxx = product type marking code, ex: df10m yww = date code marking y = last digit of year ex: 2 for 2002 ww = week code 01 to 52 xxxxx yww marking information device * packaging shipping dfxm dfxm-t df-m df-m tube 1500/tape & reel, 13-inch ordering information (note 4) important notice life support diodes incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes witho ut further notice to any product herein. diodes incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. the user of products in such applications shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on our website, harmless against all damages. diodes incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written appr oval of the president of diodes incorporated.
|
